Blog

Ronghua Refractory Technology Co., Ltd. focuses on the research and development and manufacturing of refractory materials and has cooperated with many high-temperature companies around the world for many years.

  • Introduce brick of low stomatic clay simply

    As the development of science and technology, produce a standard rise, fireproof data industry appeared various products, among them, there are a lot of kinds in the classification of argillaceous brick, be like, pledge argillaceous brick is waited a moment brick of brick of low stomatic clay, low creep clay, gently, do not use with phyletic argillaceous brick go up in different kiln furnace, use in different kiln furnace position...

  • How to choose brick of Mo Laishi heat preservation?

    Brick of Mo Laishi heat preservation is common firebrick, multi-purpose mix at shaft of hot-blast stove roof, blast furnace kiln of agglomeration of regenerator of kiln of frit of hearth, glass, pottery and porcelain is waited a moment. It has a lot of property, make use on kiln furnace can produce very lasting effect, among them its high temperature capability basically depends on the content of alumina and cent of glass of Mo Laishi get along with...

  • Get together brief introduction of brick of heat preservation of light Mo Laishi and manufacturing technology

    Get together brick of heat preservation of light Mo Laishi, bulk density is in commonly 0.6-1.2g/cm3, use temperature 1300 degrees - 1550 degrees, the recipe design of each level is unique, ask in order to satisfy the or else of the user with what use below the environment. Brick of heat preservation of Mo Laishi series is with high grade and high pure raw material, add the filler that has strict classification by level, form even one...

  • Tall aluminous brick uses the requirement that should have normally

    The tall aluminous brick below use condition is the effect that often suffers high temperature for a long time, tall aluminous brick still bears at the same time bigger mechanical loading, and of the solid data that also gets the exercise inside blast furnace wear away. Inside hot-blast stove of regenerator of steam boiler firebox, open-hearth furnace, blast furnace, besides often accompany the high temperature that has intense change besides, still suspension is in...

  • Stick the main raw material of earthy firebrick

    The main raw material that sticks earthy firebrick is clay, in clay main and mineral for kaolinite, contain the impurity such as quartz, micaceous, pyrite, feldspar. Unripe clay heats to 1300 ~ 1400 ℃ can become fireproof grog, after clinker is broken, deserve to compare according to certain grain, with unripe clay water of mixture mix into shapes. Unripe clay is...

  • Inchoate traditional rotary kiln uses firebrick

    Inchoate traditional rotary kiln is wet long kiln of kiln and dry method, more than heat boiler kiln, hear rate all is in above of grog of Kg of 4.18 × 1500kJ / , temperature of clinker to calcine is average under 1350 ℃ , firing take with tall aluminous brick, others uses clay brick. As technical progress. The Liboerjia that appeared to use kiln end waste gas heat engine and match...

  • Brick of Mo Laishi heat preservation has taller performance characteristics

    Brick of Mo Laishi heat preservation is having exceedingly good performance characteristics, as the development of research, its performance characteristics is better served kiln furnace industry, satisfied their requirement, also brought to them considerable it is economic benefits, also be them at the same time managing manufacturing cost, improved the service life of kiln furnace. <b. . .

  • What is adiabatic heat preservation fireproof material

    Fireproof material has adiabatic thermal insulation normally qualitative the characteristic with light, loose, poriferous, small thermal conductance. Use commonly prevent heating power equipment and be lost of conduit quantity of heat.

  • Intensity of compression of firebrick normal temperature

    Intensity of compression of firebrick normal temperature is a it is important to be compared in each index, compression intensity namely fireproof having usinging in saying can susceptive is the biggest pressure, if use pressure to exceed compression intensity target, firebrick will appear crackle or mar an appearance. So how does accurate test give strength of compression of firebrick normal temperature? Above all firebrick...

  • Light qualitative tall aluminous brick

    Light qualitative tall aluminous brick calls tall aluminium adiabatic brick again. Among them alumina

  • Analyse heat preservation brick and firebrick simply

    Heat preservation brick is used at adiabatic heat preservation, reduce hot loss, it does not contact blaze directly commonly. Firebrick contacts blaze directly normally, it faces the broil of kiln ingle blaze to bake directly, the position that is used as a result of them differs somewhat, so of firebrick fireproof degree of photograph is tall to wanting, so the density between them and function also are differ somewhat...

  • The brick of light qualitative heat preservation of green environmental protection

    Fireproof material guild is having more capacious before the development concept of look up sex, the managing, phyletic diversification of resource the sources of energy and character the tall, technology that make is good change, use convenient change etc. Be analysed at present from national policy, fireproof data industry needs an innovation on the technology, the quality with product better need and the craft that make, for...

Get in Touch
Fill out the short form below and we will be in touch.
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram question-circle