The mineral bases that the raw material of argillaceous brick is saggar is kaolinite, accompany have a few the impurity such as stone of iron ore of quartz, sulfur, rutile, candle and organic matter. The function of saggar basically depends on kaolinite, but the existence harm of foreign matter is great, among them very harmful is Fe2O3 and TiO2. They make the brick still is in firing when the blemish such as generation beat bubble, fusion hole and shading, fall low fever is able to bear or endure into rate and goods igneous function, accordingly, should Fe2O3 and TiO2 content are less than 1.2% ? 1.5% . The MgO, existence of the CaO, impurity such as K20, Na2O can be restrained not come petrifaction, and make of goods fireproof degree, loading bate temperature drops significantly. Accordingly, afore-mentioned matter content should control strictly: MgO+CaO is less than 0.6% ? 1.5% , k20+Na20 is less than 1.5% , foreign matter gross must is less than 6% . The composition of kaolinite is Al2O3·2SiO2·2H2O, its theory composition is Al2O3 39.48% , siO2 46.60% , after H2O 13.92% , classics burns, composition is Al2O3 45.87% , siO2 54.12% . Hardness is inferior, be commonly 1? 3, its density is 2.61? 2.68g/crn3.
Argillaceous brick is one of firebrick with industrial kiln commonly used furnace, of this brick fireproof degree between 1580~1770 ℃ . Basically kiln of brick of clay of brick of clay of brick of common clay brick, much grog clay, low creep, small air hole, glass uses a variety of classification such as large clay brick. When the client is buying argillaceous brick, how to choose ability to single out high grade product, specific can consult the following 8 index:
1, chemical composition: This character of fireproof material mixes the first part resolution of the product characteristic.
2, bulk density: Unit volume heft, density is big, explain detail close sex is good, intensity is likely tall, but coefficient of thermal conductivity may be big.
3, apparent pore rate: Although do not have strict requirement to apparent pore rate, but every produce manufacturer must control apparent pore rate strictly.
4, loading bate temperature: Also call end of reopen of high temperature carry on one's shoulder to be out of shape temperature, clarify the firebrick revolt to high temperature ability.
5, heatproof shake function: Fight temperature to be changed quickly and not damaged ability.
6, compressive strength: Accept (normal temperature) ability of the greatest pressure.
7, fight lose strength: Accept the ability that cuts pressure.
8, linear change ratio: Also make weigh the change that burn a line or call odd line the change, point to the change state that leaves in equal temperature every time.
By plasticity the soft qualitative clay with strong, dispersive big sex and grog of one part clay are made up and common clay brick is become. Wraparound cent is argillaceous grog brick and kaolin grog brick. Their main high temperature capability is fireproof degree, fancy article be more than 1750 ℃ , is one class tasted for 1730? 1750 ℃ , seconds is 1670? 1730 ℃ , are 3 class tasted for 1580? 1670 ℃ . Department of brick of much grog clay points to contain clinker 80% above, combine clay 20% the following goods. Brick of much grog clay is in barren to change position for the most part as a result of preform, be out of shape not easily in production process, the over all dimension that can assure adobe, make firing goods has idealer bulk density, mechanical intensity, heatproof shake gender and taller fireproof degree. Brick of clay of completely raw material also says not to have clinker clay brick, it is to use plasticity the horniness clay with weak, very small systole or pyrophyllite make low, dispersive sex. Because this kind of raw material is inherent combinative moisture is little, after smashing although gift,certain extra water is divided, but the grain composition that still can keep original, add clinker because this is OK again not additionally, and because do not have clinker,firing finished product is not met and produce contractive phenomenon.
Purchase argillaceous brick principal understanding element is argillaceous brick norms namely. Cent of argillaceous brick norms is mark model, general, different, special model reach super- special model 5 kinds. Make detailed introduction for you below:
Dimension of norms of mark clay brick is 230mm×114mm×65mm.
The person that every has one of the following cent features is general clay brick namely:
A. Quality is 2~8kg;
B. Ply dimension is 55~75mm;
C. Not; of 4 over gage
D. Size dimensions is compared do not be more than 4;
E. Do not carry reentrant, circular arc, channel, abandon, the acute angle of aperture, hole and ≤75° .
The person that every has one of the following cent features is different clay brick namely:
A. Quality is 2~15kg;
B. Ply dimension is 45~95mm;
C. Size dimensions is compared do not be more than 6;
D. Circular arc, reentrant gross not 2 over;
E. The channel, number that shed not 4 over;
F. > 50° and the acute angle of ≤75° .
G. Do not take aperture, hole.
One of the following cent features person it is general clay brick namely:
A. Quality is 1.5~30kg;
B. Ply dimension is 35~135mm, the length dimension of brick tubal account is not more than 300mm;
C. Size dimensions is compared do not be more than 8;
D. Circular arc, reentrant gross not 4 over;
E. The channel, number that shed not 8 over;
F. The acute angle of a 30°~50° .
G. Not 1 over aperture or hole.
The siliceous aluminium that argillaceous brick is alumina content 30~40% is qualitative refractory products, its are mineral composition is Molaishi (3Al2O3·2SiO2)20%~50% , vitreous photograph 25%~60% and square quartz and quartz (highest can amount to 30%) . Can be common clay brick divided by Al2O3 content for: ? Bad?>40%) , second-class (> 35%) , third class (> 30%); is corresponding fireproof degree do not mix under 1700 ℃ , 1670 ℃ temperature of bate of loading of 1610 ℃ ; all is in thermal stability of 1250~1450 ℃ ; is better. Use the dry belt in rotary kiln, warm-up belt, component commonly inside ungird and cooling machine. In recent years, a lot of countries developed brick of special type clay, maintain in order to make its are in fight alkaline below erodent premise, raise its fireproof temperature.
|
Old |
Brick |
Dimension |
Norms |
Area |
Smelt metal |
||||||
|
Dimension matching build by laying bricks or stones is A |
|||||||||||
|
B |
A |
C |
65 |
75 |
114 |
150 |
|||||
|
Tz-1 |
T-1 |
172 |
114 |
65 |
172×114×65 |
1274.5 |
T-14 |
||||
|
Tz-2 |
T-2 |
230 |
114 |
32 |
230×114×32 |
839.0 |
|||||
|
Tz-3 |
T-3 |
230 |
114 |
65 |
230×114×65 |
10.50 |
18.30 |
1704.3 |
T-3 |
||
|
Tz-4 |
T-4 |
230 |
172 |
65 |
230×172×65 |
10.50 |
2571.4 |
T-9 |
|||
|
Tz-5 |
T-5 |
172 |
114 |
75 |
172×114×75 |
1470.6 |
T-13 |
||||
|
Tz-6 |
T-6 |
230 |
114 |
75 |
230×114×75 |
12.10 |
18.30 |
1966.5 |
T-2 |
||
|
T-7 |
230 |
150 |
75 |
230×150×75 |
24.03 |
2587.5 |
R1 |
||||
|
T-8 |
230 |
172 |
75 |
230×172×75 |
12.10 |
2967.0 |
T-8 |
||||
|
Tz-7 |
T-9 |
300 |
150 |
65 |
300×150×65 |
2925.0 |
T-7 |
||||
|
Tz-8 |
T-10 |
300 |
150 |
75 |
300×150×75 |
3375.0 |
|||||
|
Tz-9 |
T-11 |
300 |
225 |
75 |
300×225×75 |
12.10 |
5062.5 |
||||
|
T-12 |
345 |
114 |
65 |
345×114×65 |
18.30 |
2556.5 |
|||||
|
T-13 |
345 |
150 |
75 |
345×150×75 |
24.03 |
3881.3 |
R2 |
||||
|
T-14 |
380 |
150 |
65 |
380×150×65 |
10.65 |
3705.0 |
|||||
|
T-15 |
380 |
150 |
75 |
380×150×75 |
12.26 |
4275.0 |
|||||
|
T-16 |
380 |
225 |
75 |
380×225×75 |
12.26 |
6412.5 |
|||||
|
T-17 |
460 |
150 |
65 |
460×150×65 |
4485.0 |
||||||
|
T-18 |
460 |
150 |
75 |
460×150×75 |
12.26 |
5175.0 |
|||||
|
T-19 |
460 |
225 |
75 |
460×225×75 |
12.26 |
7762.5 |
|||||
Smelt metal mark: T6 250×123×65 T10 250×186×75 T16 186×123×65
T1 230×113×100 T11 250×186×65 T79 460×230×75
T4 230×113×40 T12 300×225×65 T80 575×170×80
T5 250×123×75 T15 186×123×75 T81 690×170×100
T82 460×135×113
GB/T 2992——1998
Express 2. Brick of travel of side thick wedge (the horizontal stroke comes back)
|
Old |
Brick |
Dimension |
Norms |
Outside radius |
Every annulus limit piece several |
Banking angle |
Bulk |
Smelt metal |
||
|
B |
A is big / A is small |
C |
||||||||
|
Tc-21 |
T-21 |
114 |
65/35 |
230 |
114× (65/35) ×230 |
250.8 |
23.876 |
15.078 |
1311.0 |
|
|
Tc-22 |
T-22 |
114 |
65/45 |
230 |
114× (65/45) ×230 |
376.2 |
35.814 |
10.052 |
1442.1 |
T-39 |
|
Tc-23 |
T-23 |
114 |
65/55 |
230 |
114× (65/55) ×230 |
752.4 |
71.628 |
5.026 |
1375.2 |
T-38 |
|
Tc-24 |
T-24 |
114 |
75/45 |
230 |
114× (75/45) ×230 |
288.8 |
23.876 |
15.078 |
1573.2 |
|
|
Tc-25 |
T-25 |
114 |
75/55 |
230 |
114× (75/55) ×230 |
433.2 |
35.814 |
10.052 |
1704.3 |
T-37 |
|
Tc-26 |
T-26 |
114 |
75/65 |
230 |
114× (75/65) ×230 |
866.4 |
71.628 |
5.026 |
1835.4 |
T-36 |
|
Tc-27 |
T-27 |
150 |
65/35 |
300 |
150× (65/35) ×300 |
330.0 |
31.416 |
11.459 |
2250.0 |
|
|
Tc-28 |
T-28 |
150 |
65/45 |
300 |
150× (65/45) ×300 |
495.0 |
47.124 |
7.639 |
2473.0 |
|
|
Tc-29 |
T-29 |
150 |
65/55 |
300 |
150× (65/55) ×300 |
990.0 |
94.248 |
3.820 |
2700.0 |
|
|
Tc-30 |
T-30 |
150 |
75/45 |
300 |
150× (75/45) ×300 |
380.0 |
31.116 |
11.459 |
2700.0 |
|
|
Tc-31 |
T-31 |
150 |
75/55 |
300 |
150× (75/55) ×300 |
570.0 |
47.124 |
7.639 |
2925.0 |
|
|
Tc-32 |
T-32 |
150 |
75/65 |
300 |
150× (75/65) ×300 |
1140.0 |
94.248 |
3.820 |
3150.0 |
|
|
Note: Radius Rc is calculated outside in type, the brick seams ply δ to take 1 ㎜. |
||||||||||
Express brick of travel of 3 perpendicular thick wedge (vertical stroke comes back)
|
Old |
Brick |
Dimension |
Norms |
Outside radius |
Every annulus limit piece several |
Banking angle |
Bulk |
Smelt metal |
||
|
B |
A is big / A is small |
C |
||||||||
|
Ts-41 |
T-41 |
230 |
65/35 |
114 |
230× (65/35) ×114 |
506.0 |
48.171 |
7.473 |
1311.0 |
|
|
Ts-42 |
T-42 |
230 |
65/45 |
114 |
230× (65/45) ×114 |
759.0 |
72.257 |
4.982 |
1442.1 |
T-20 |
|
Ts-43 |
T-43 |
230 |
65/55 |
114 |
230× (65/55) ×114 |
1518.0 |
144.514 |
2.491 |
1573.2 |
T-19 |
|
Ts-44 |
T-44 |
230 |
65/60 |
114 |
230× (65/60) ×114 |
3036.0 |
289.072 |
1.246 |
1638.8 |
|
|
Ts-45 |
T-45 |
230 |
65/35 |
172 |
230× (65/35) ×172 |
506.0 |
48.171 |
7.473 |
1978.0 |
|
|
Ts-46 |
T-46 |
230 |
65/45 |
172 |
230× (65/45) ×172 |
759.0 |
72.257 |
4.982 |
2175.8 |
T-30 |
|
Ts-47 |
T-47 |
230 |
65/55 |
172 |
230× (65/55) ×172 |
1518.0 |
144.514 |
2.491 |
2373.6 |
T-29 |
|
Ts-48 |
T-48 |
230 |
75/45 |
114 |
230× (75/45) ×114 |
582.7 |
48.171 |
7.473 |
1573.6 |
|
|
Ts-49 |
T-49 |
230 |
75/55 |
114 |
230× (75/55) ×114 |
874.0 |
72.257 |
4.982 |
1704.3 |
T-18 |
|
Ts-50 |
T-50 |
230 |
75/65 |
114 |
230× (75/65) ×114 |
1748.0 |
144.514 |
2.491 |
1835.4 |
T-17 |
|
Ts-51 |
T-51 |
230 |
75/70 |
114 |
230× (75/70) ×114 |
3496.0 |
289.072 |
1.246 |
1901.0 |
|
|
Ts-52 |
T-52 |
230 |
75/45 |
172 |
230× (75/45) ×172 |
582.7 |
48.171 |
7.473 |
2373.6 |
|
|
Ts-53 |
T-53 |
230 |
75/55 |
172 |
230× (75/55) ×172 |
874.0 |
72.257 |
4.982 |
2571.4 |
T-28 |
|
Ts-54 |
T-54 |
230 |
75/65 |
172 |
230× (75/65) ×172 |
1748.0 |
144.514 |
2.491 |
2769.2 |
T-27 |
|
T-55 |
230 |
90/60 |
114 |
230× (90/60) ×114 |
697.7 |
48.171 |
7.473 |
1966.5 |
||
GB/T 2992——1998
Watch 3 (add) (vertical stroke comes back)
|
Old |
Brick |
Dimension |
Norms |
Outside radius |
Every annulus limit piece several |
Banking angle |
Bulk |
Smelt metal |
||
|
T-56 |
230 |
85/65 |
114 |
230× (85/65) ×114 |
989.0 |
72.257 |
4.982 |
1966.5 |
||
|
T-57 |
230 |
80/70 |
114 |
230× (80/70) ×114 |
1863.0 |
144.514 |
2.491 |
1966.5 |
||
|
T-58 |
230 |
90/60 |
172 |
230× (90/60) ×172 |
697.7 |
48.171 |
7.437 |
2967.0 |
||
|
T-59 |
230 |
85/65 |
172 |
230× (85/65) ×172 |
989.0 |
72.257 |
4.982 |
2967.0 |
||
|
T-60 |
230 |
80/70 |
172 |
230× (80/70) ×172 |
1863.0 |
144.514 |
2.491 |
2967.0 |
||
|
T-61 |
300 |
65/35 |
150 |
300× (65/35) ×150 |
660.0 |
62.832 |
5.730 |
2250.0 |
||
|
Ts-55 |
T-62 |
300 |
65/45 |
150 |
300× (65/45) ×150 |
990.0 |
94.248 |
3.820 |
2475.0 |
|
|
Ts-56 |
T-63 |
300 |
65/55 |
150 |
300× (65/55) ×150 |
1980.0 |
188.496 |
1.910 |
2700.0 |
T-26 |
|
Ts-57 |
T-64 |
300 |
65/60 |
150 |
300× (65/60) ×150 |
3960.0 |
376.996 |
0.955 |
2812.5 |
|
|
T-65 |
300 |
65/35 |
225 |
300× (65/35) ×225 |
660.0 |
62.832 |
5.730 |
3375.0 |
||
|
Ts-58 |
T-66 |
300 |
65/45 |
225 |
300× (65/45) ×225 |
990.0 |
94.248 |
3.820 |
3712.5 |
T-35 |
|
Ts-59 |
T-67 |
300 |
65/55 |
225 |
300× (65/55) ×225 |
1980.0 |
188.496 |
1.910 |
4050.0 |
T-34 |
|
Ts-60 |
T-68 |
300 |
75/45 |
150 |
300× (75/45) ×150 |
760.0 |
62.832 |
5.730 |
2700.0 |
|
|
Ts-61 |
T-69 |
300 |
75/55 |
150 |
300× (75/55) ×150 |
1140.0 |
94.248 |
3.820 |
2925.0 |
|
|
Ts-62 |
T-70 |
300 |
75/65 |
150 |
300× (75/65) ×150 |
2280.0 |
188.496 |
1.910 |
3150.0 |
|
|
Ts-63 |
T-71 |
300 |
75/70 |
150 |
300× (75/70) ×150 |
4560.0 |
376.992 |
0.955 |
3626.5 |
|
|
Ts-64 |
T-72 |
300 |
75/45 |
225 |
300× (75/45) ×225 |
760.0 |
62.832 |
5.730 |
4550.0 |
|
|
Ts-65 |
T-73 |
300 |
75/55 |
225 |
300× (75/55) ×225 |
1140.0 |
94.248 |
3.820 |
4387.5 |
|
|
Ts-66 |
T-74 |
300 |
75/65 |
225 |
300<sp, an= "" >× (75/65) ×225 |
2280.0 |
188.496 |
1.910 |
4725.0 |
|
|
T-75 |
300 |
90/60 |
150 |
300× (90/60) ×150 |
910.0 |
62.832 |
5.730 |
3375.0 |
||
|
T-76 |
300 |
85/65 |
150 |
300× (85/65) ×150 |
1290.0 |
94.248 |
3.820 |
3375.0 |
||
|
T-77 |
300 |
80/70 |
150 |
300× (80/70) ×150 |
2430.0 |
188.496 |
1.910 |
3375.0 |
||
|
T-78 |
300 |
90/60 |
225 |
300× (90/60) ×225 |
910.0 |
62.832 |
5.730 |
5062.5 |
||
|
T-79 |
300 |
85/65 |
225 |
300× (85/65) ×225 |
1290.0 |
94.248 |
3.820 |
5062.5 |
||
|
T-80 |
300 |
80/70 |
225 |
300× (80/70) ×225 |
2430.0 |
188.496 |
1.910 |
5062.5 |
||
|
T-81 |
380 |
80/50 |
150 |
380× (80/50) ×150 |
1038.0 |
79.587 |
4.523 |
3705.0 |
||
|
T-82 |
380 |
80/60 |
150 |
380× (80/60) ×150 |
1558.0 |
119.381 |
3.016 |
3990.0 |
||
|
T-83 |
380 |
80/70 |
150 |
380× (80/70) ×150 |
3116.0 |
238.762 |
1.508 |
4275.0 |
||
|
T-84 |
380 |
80/75 |
150 |
380× (80/75) ×150 |
6232.0 |
477.523 |
0.754 |
4417.5 |
||
|
T-85 |
380 |
70/60 |
150 |
380× (70/60) ×150 |
2736.0 |
238.762 |
1.508 |
3705.0 |
||
|
T-86 |
380 |
80/50 |
225 |
380× (80/50) ×225 |
1038.7 |
79.587 |
4.523 |
5557.5 |
||
|
T-87 |
380 |
80/60 |
225 |
380× (80/60) ×225 |
1558.0 |
119.381 |
3.016 |
5985.0 |
||
Smelt metal mark: T-21 250×123×75/65 T-24 171×113×65/55 T-31 250×186×75/65
T-22 250×123×65/55 T-32 250×186×65/55
T-23 250×123×65/45
T-25 171×113×65/45 T-33 250×186×65/45
GB/T 2992——1998
Watch 3 (be over) vertical stroke comes back
|
Old |
Brick |
Dimension |
Norms |
Outside radius |
Every annulus limit piece several |
Banking angle |
Bulk |
Smelt metal |
||
|
B |
A is big / A is small |
C |
||||||||
|
T-88 |
380 |
80/70 |
225 |
380× (80/70) ×225 |
3116.0 |
238.762 |
1.508 |
6412, 5 |
||
|
T-89 |
380 |
90/60 |
150 |
380× (90/60) ×150 |
1165.3 |
79.587 |
4.523 |
4275, 0 |
||
|
T-90 |
380 |
85/65 |
150 |
380× (85/65) ×150 |
1653.0 |
119.381 |
3.016 |
4275.0 |
||
|
T-91 |
380 |
90/60 |
225 |
380× (90/60) ×225 |
1165.3 |
79.587 |
4.523 |
6412, 5 |
||
|
T-92 |
380 |
85/65 |
225 |
380× (85/65) ×225 |
1653.0 |
119.881 |
3.016 |
6412.5 |
||
|
T-93 |
460 |
90/60 |
150 |
460× (90/60) ×150 |
1410.7 |
96.342 |
3.737 |
5175.0 |
||
|
T-94 |
460 |
80/60 |
150 |
460× (80/60) ×150 |
1886.0 |
144.514 |
2.491 |
4830.0 |
||
|
T-95 |
460 |
80/70 |
150 |
460× (80/70) ×150 |
1.246 |
5175.0 |
||||
|
T-96 |
460 |
80/75 |
150 |
460× (80/75) ×150 |
7544.0 |
578.054 |
0.623 |
5347.5 |
||
|
T-97 |
460 |
70/60 |
150 |
460× (70/60) ×150 |
3312.0 |
289.027 |
1.246 |
4485.0 |
||
|
T-98 |
460 |
90/60 |
225 |
460× (90/60) ×225 |
3.737 |
7762.5 |
||||
|
T-99 |
460 |
80/60 |
< , p Class=MsoNormal>225 |
460× (80/60) ×225 |
2.491 |
7245.0 |
||||
|
T-100 |
460 |
80/70 |
225 |
460× (80/70) ×225 |
1.246 |
7762.5 |
||||
|
T-101 |
460 |
85/65 |
150 |
460× (85/65) ×150 |
2001.0 |
144.514 |
2.491 |
5175.0 |
||
|
T-102 |
460 |
85/65 |
225 |
460× (85/65) ×225 |
2001.0 |
144.514 |
2.491 |
7762.5 |
||
Note: 1 * is wait for intermediate dimension
2 Radius R0 is calculated outside in type, to the brick that grows at 380 ㎜ not quite character, brick seams ply δ to take 1 ㎜; long to not be less than 380 ㎜ brick, the brick seams ply δ to take 2 ㎜.
Express brick of 4 perpendicular wide wedge (radiation)
|
Old |
Brick |
Dimension |
Norms |
Outside radius |
Every annulus limit piece several |
Banking angle |
Bulk |
Smelt metal |
||
|
B |
A is big / A is small |
C |
||||||||
|
Tk-81 |
T-111 |
230 |
114/74 |
65 |
230× (114/74) ×65 |
661.3 |
36.128 |
9.965 |
1405.3 |
T-44 |
|
Tk-82 |
T-112 |
230 |
114/94 |
65 |
230× (114/94) ×65 |
1322.5 |
79.257 |
4.982 |
1554.8 |
T-43 |
|
Tk-83 |
T-113 |
230 |
114/104 |
65 |
230× (114/104) ×65 |
2645.0 |
144.514 |
2.491 |
1629.6 |
|
|
T-114 |
230 |
150/135 |
65 |
230× (150/135) ×65 |
2315.3 |
96.342 |
3.737 |
2130.4 |
||
|
T-115 |
345 |
114/69 |
65 |
345× (114/69) ×65 |
881.7 |
48.171 |
7.473 |
2051.9 |
||
|
T-116 |
345 |
114/69 |
65 |
345× (114/69) ×65 |
1322.5 |
72.257 |
4.982 |
2220.1 |
||
|
T-117 |
345 |
114/99 |
65 |
345× (114/99) ×65 |
2645.0 |
144.514 |
2.491 |
2388.3 |
||
|
T-118 |
345 |
150/130 |
65 |
345× (150/130) ×65 |
2604.8 |
108.385 |
3.322 |
3139.5 |
||
|
T-119 |
230 |
150/90 |
75 |
230× (150/90) ×75 |
578.8 |
24.086 |
14.947 |
2070.0 |
||
|
T-120 |
230 |
150/120 |
75 |
230× (150/120) ×75 |
1157.7 |
48.171 |
7.473 |
2328.8 |
||
Smelt metal mark: T-43 230×113/96×65
T-44 230×113/76×65
T-45 230×113/56×65
GB/T 2992——1998
Express brick of 4 perpendicular wide wedge (be over) (radiation)
|
Old |
Brick |
Dimension |
Norms |
Outside radius |
Every annulus limit piece several |
Banking angle |
Bulk |
Smelt metal |
||
|
B |
A is big / A is small |
C |
||||||||
|
T-121 |
230 |
150/135 |
75 |
230× (150/135) ×75 |
2315.3 |
96.342 |
3.737 |
2458.1 |
R3 |
|
|
T-122 |
230 |
114/104 |
75 |
230× (114/104) ×75 |
2645.0 |
144.514 |
2.491 |
1880.3 |
||
|
T-123 |
345 |
150/90 |
75 |
345× (150/90) ×75 |
868.3 |
36.128 |
9.965 |
3105.0 |
||
|
T-124 |
345 |
150/110 |
75 |
345× (150/110) ×75 |
1302.4 |
54.193 |
6.643 |
3363.8 |
R6 |
|
|
T-125 |
345 |
150/130 |
75 |
345× (150/130) ×75 |
2604.8 |
108.385 |
3.322 |
3622.5 |
||
|
T-126 |
345 |
114/99 |
75 |
345× (114/99) ×75 |
2645.0 |
144.514 |
2.491 |
2755.7 |
||
|
Note: Radius R0 is calculated outside in type, long to not be more than 345 ㎜ brick, the brick that the ply δ that the brick seams takes 1 ㎜ to grow to not be less than 380 ㎜, the brick seams ply δ to take 2 ㎜. |
||||||||||
Express brick of 5 arch foot (arch horn)
|
Old |
Brick |
Dimension ㎜ |
Banking angle |
Norms |
Bulk |
|||||
|
L |
A |
B |
C |
E |
D |
|||||
|
TJ-91 |
T-131 |
230 |
199 |
266 |
114 |
92 |
84 |
60/30 |
230×60×114 |
4730.0 |
|
T-132 |
230 |
199 |
266 |
114 |
90 |
51 |
50/40 |
230×50×114 |
4549.7 |
|
|
TJ-97 |
T-133 |
300 |
199 |
333 |
73 |
73 |
49 |
60/30 |
300× (60) ×73 |
3414.0 |
|
T-134 |
300 |
266 |
333 |
73 |
103 |
73 |
50/40 |
300× (50) ×73 |
4846.0 |
|
|
T-135 |
380 |
266 |
400 |
73 |
104 |
76 |
60/30 |
380× (60) ×73 |
5485.6 |
|
|
T-136 |
380 |
338 |
333 |
73 |
42 |
89 |
50/40 |
380× (50) ×73 |
5503.0 |
|
|
T-137 |
460 |
338 |
467 |
73 |
69 |
103 |
60/30 |
460× (60) ×73 |
8011.1 |
|
|
T-138 |
460 |
400 |
400 |
73 |
78 |
104 |
50/40 |
460× (50) ×73 |
7877.0 |
|
|
Note: Oblique plane grows L dimension to be referenced dimension. |
||||||||||
Get Price
WhatsApp